G200 drilling cycle with iso programming

[fisa 0]

This drilling cycle in iso programming format with G200 Q parameter..some my machine not accept this format even i change machine programming format from Heidenhain to iso..... when i transfer this program from pc to machine there is a error come on G200 line need help regarding the issue

 

Regards

Asif

[LxCoder 32]

It can be wrong values of Q-parameters. Try to copy full values from malual and check the result. I have no more idea about this...

[fisa 0]

I have successfully run same program on another tnc426 machine.. without any issue...but this machine give me error...can someone give me any advice

 

Asif

[DJ Astro 55]

Try to create G200 cycle directly from the operation panel of this machine and compare it with the error cycle in your example.

[fisa 0]

Yes boss i try it but machine not accept G200...see jpeg

As you see when in try to add G200 the machine giving me error message

[LxCoder 32]

Seems to be, this machine doesn't support G200 cycles... Too strange for Heidenhain CNC... May be "HELP" buttion contains some info about driling cycles using by this CNC? 

Or canned cycles wasn't bought for you machine, like an option (if it possible). Or this cycles was turned off by setup.

[fisa 0]

Yes its looking strange.....but as manual says that you can easily change program format form Heidenhain to iso ...and we also want to make in ISO format.. I have post processor for this machine which already tested another same machine...i also tested most of program sequence on this machine but ... drilling is a issue.....one more thing when i chose ".H" file type for editing or as new program.all cycle definition hard and soft key is enable ..and i can call G200 cycle only in (.H) format file type..but all cycle definition soft and hard keys is disabled when i work on(.i) file type.... I don't know if there is some parameter to enable G200 series cycle for iso programming..or something else.. still struggling..

 

Regards

[LxCoder 32]

What can I say.. Keep on struggling, don't give up! good luck.

[moovi 10]

[fisa 0]

Yes bro exactly same thing i already done on tnc 430..but not able to do it on tnc426 please help